Questions & Answers

SIZES & HOW TO

If I have an accidental spill of silicone on the face of Bonethane, what do I do?

Use either mineral turps, wax or grease remover. Apply product to effected area liberally, to remove silicone. The residue should be removed immediately by washing area with warm soapy water. These solvents are available at Bunnings or your local grocery store.

What Silicone do I use?

Adhesive use Parfix All Purpose, highly flexible silicone sealant. (Non acidic) and in clear. Mould & UV resistant. Neutral cure, non corrosive. Available at Bunnings.

When I buy Bonethane and I need two or more sheets the same colour should I buy from the same colour batch.

Yes, it is advised to buy off the same colour batch because of the curing and colour aging process. Please contact (02) 9756-2880 for more information

Is Bonethane a Glass Splashback?

No, Bonethane is Polymer based. Suitable for high heat applications that do not exceed 135°C.  Maintain distance specs in extreme heat areas. Bonethane Premium  has a continuous service temperature of 100°C

What sheet sizes are available to order?

Sheet sizes: Large sheet: 5mm x 2400 x 1200,

Standard sheet: 5mm x 2400 x 760 and Small sheet: 5mm x 1200 x 760.

Available through Bunnings Nationally.

What is the thickness of Bonethane?

5mm.

Can you cut the Bonethane sheets yourself?

Yes, Bonethane sheets can be easily cut by using the most standard fabricating equipment.

Are there different grades of Bonethane?

Yes. There is Bonethane GN, & GN Bendable grade with continuous service temperature of 85° this is suitable for shop fitters. Available in 3mm, 5 mm & 10 mm, 2520 by 1260, 2480 by 1870 & 2010 by 3030. Suitable for outdoor 5 year outdoor warranty. Excellent weathering and scratch resistance is excellent. Bonethane UV grade used in temperatures from 0 to 88° depending on application, available range is 1250mm x 2500mm and 1500mm x 3000mm. Custom sizes can be supplied to a maximum width of 1550mm and any length subject to handling, transport, and quantity. Sheet thickness can range from 2mm to 6mm. On volume orders for the Bonethane range we can customise your measurements

Does Bonethane GN and Bonethane UV cut differently to Bonethane Premium?

Yes plastic blade or stainless steel must be used when cutting Bonethane GN or UV. Please refer to spec sheets.

How many people are required to install Bonethane?

One to Two people.

Why do people choose Bonethane?

Unlike glass, Bonethane will not chip or break during handling and is easy to maintain and repair.  Bonethane is also easy to install and is cost effective. Available, in any colour. Cut outs can be done on site saving you further labour costs. Fine scratches can be buffed out. Bonethane Premium has a continuous service temperature of 100°c. Bonethane Premium is also suitable for homes that suffer on ground movement which create stress in the foundations of homes leaving cracks in walls which can effect tiles or glass splash backs. Bonethane is designed to float within its parameters as we allow a 1 to 2mm gap prior to installation, allowing Bonethane to expand and contract in its environment.

Can Bonethane be placed on a flame or electrical element?

No, do not leave extreme heat items in close proximity i.e. hot pans, leaning against Bonethane. This could damage or mark the product if left for long periods of time. Do not place Bonethane on a direct flame or heating element or anything of constant extreme heat nature (distance min of 20 cm).

Warranty will be void if information stated is not followed. Bonethane has a continuous service temperature of 100°C maintaining distance specifications. Bonethane continuous service temperature is slightly higher than 100°C stated above, however we must maintain care with all products as once product is in your hands it is your responsibility to assure proper measures are in place when installing for your own safety and safety of others.

Can Bonethane be used as a bench top?

It can, however Bonethane was designed to sit up right against wall, and is a beautiful look but like any surface can ware over periods reflecting heavy traffic, fine scratches can be repaired with ease. Bonethane GN grade would be more suitable for such an application but not for heavy trafficked areas.

Can I use Pine o clean, Bleach or  thinners etc. on Bonethane face to clean?

No it's part of your warranty that Bonethane is maintained strictly with warm soapy water and a sponge to keep bright and shiny, please refer to maintenance care sheet. This is also better for the environment. For oil removal in bathrooms or kitchens a commercial plastic cleaner or Bam Degreaser followed by a wash with warm soapy water.... will do the trick

What do we use to glue Bonethane to wall?

Clear non acidic silicone. Water proof silicone suitable for kitchen, bathrooms and laundries. Preferred silicone is Parfix All Purpose, in clear, non acidic, neutral cure

If I used a scourer on Bonethane will it damage the sheet?

Yes, Bonethane has exceptional cleaning characteristics, there is no need for scourers or abrasive cleaning agents that can harm your hands and your health. If this has happens though rest assured most scuffs can be reversed by light buffing restoring Bonethane to its original sheen.

Can I use coloured silicone on the back of Bonethane to mount on to wall?

No you must use clear non acidic silicone  (Parfix All Purpose in clear) clear should not penetrate through the nominated Bonethane™ colour. By using a darker non acidic silicone  you run the risk of impressions of the silicone through the sheet. The same thing will happen if you use acidic silicone or further by using acidic silicone it will not bind to the wall.

Is there a special technique to applying silicone in preparation to mounting Bonethane to the wall?

Yes, please refer to step by step for grid effect (refer to step 7 of your Bonethane care sheet). Or contact 02 97562880 for tips!

What other items do I need to install Bonethane ?

The following items are required that are not included in the Bonethane pack: tile wedges, clear silicone (non acidic(Parfix All Purpose, in clear)), protective goggles, dust mask, saws, level, bracing etc. The following tools can also be used for cutting: circular saw, jigsaws; band saws, router, planer, drilling etc require plastic drill bit attachment or stainless steel bit.

TIP: Ensure wall is neutral colour and free of holes etc, refer to preparation of Bonethane in Tips section.

Can I peel the masking off of Bonethane prior to installation?

If you have multiple sheets you can peel the masking up a couple of centimetres to verify colour consistency if you are uncertain that it has come from the same colour batch. Masking should remain on the face of Bonethane while cutting or when applying the silicone to the back. If you remove prior to cutting it is at your own risk.

Why can there sometimes be colour variations within sheet?

For reasons beyond our control their can be multiple reasons, one can be clarity colour within the sheet the other is the colour aging process. All colours go through a curing and aging process, the colours age like a fine cheese or wine, before it settles into its colour.

Can you colour match glass within 10%

No, glass has a light green ting which can either lighten or deepen the colour.

Can you apply the Bonethane colour to the glass insert offer.

Yes, just take into consideration that the glass  because of the natural green look can come up either ligher or deeper in colour but this stands out as a feature.  If this is not right for you we can colour match to your cook top. We also customise glass inserts to fit your cook top conditions apply.

Can I go over existing tiles.

Yes give a sand and coat tiles a neutral colour.
Take into consideration how far the tiles protrude from the wall as once the Bonethane sheet is placed over the face of the tiles it will sit out a further 5mm from the wall.