► If you have an accidental spill of silicone on the face of Bonethane, what do you do?

Remedy : Use either mineral turps, wax or grease remover. Apply product to effected area liberally, to remove silicone.
The residue should be removed immediately by washing area with warm soapy water. These solvents are available at Bunnings or your local grocery store.

► When cleaning only use warm soaked soapy (detergent) sponge in a circular motion. Do not use abrasive sponge ie;  scourer to wash.

► Bonethane is suitable for bathrooms, Bonethane will not attract mould. To dissolve build up of oils attracted by frequented traffic of showering, commercial plastic cleaner or Bam Degreaser will do the trick. Then apply same method of washing with warm soapy water to rid residue.

► When rinsing use a towelling cloth and merge into clean warm water & squeeze, wiping the lather off in a downwards motion repeat second or third time, removing excess lather.

► When drying use a warm damp towelling cloth, do not polish. Bonethane will dry and shine, providing the excess water becomes minimal when wiping down with warm damp towelling cloth.

► If using cordless equipment ensure batteries are fully charged and blades are suitable and sharp for cutting.

► Ensure protective film is left on the face of Bonethane whilst installing.

► When ordering more than one sheet of Bonethane, it is advised to order of same colour batch, this is because of the colour settling process.

► Take up the free toughened star fire glass offer available to you for free in one of two sizes when you purchase through Bunnings conditions apply.

For more information contact (02) 9756 2880, or we can custom size, conditions apply

► Do not place Bonethane on a direct flame, heat element or anything of constant extreme heat nature.

► Items of extreme heat must not be allowed to touch or be placed too close to Bonethane.

► Do not butt up stove tops against Bonethane.

► Do not use abrasive cleaners, scourers or scouring compounds, window cleaners, acetone, toluene chloroform, xylene, amyl acetate, dichloromethane, butyl alcohol, butyl acetate, cellusolve, giacial acetate acid, cresols/phenols, halogenated solvents, Ketone (pvc glue) ethylacetate, chlorinated solvents sulphuric acid, MEK methyl alcohol and bleach. Do not apply thinners on the face. Thinners can be applied to edge for polishing, ensuring thinner does not touch the face. In the event of accidental spill, follow the buffing procedure to reverse the process.

► Do not use big blades if you decide to use a circular saw, this will chop into the product. A fine blade should be used, 
jigsaw is the preferred tool. Remember secure your sheet!